Product Manual - ZMORPH FAB
130
Safety at work
▪
Do not place your hands in the workspace under any circumstances after starting the spindle. Any
exposure of the body to rotating parts of the machine can lead to a serious injury. It is therefore
essential to use the device safely and in accordance with the instructions,
▪
The Zmorph Fab with CNC Milling Toolhead mounted and running cannot be left unattended,
▪
The use and maintenance of the machine must always be carried out in the manner described in
the operating instructions,
▪
Under no circumstances should you open covers that conceal electronic components of the machine
when the power supply is connected. If there is a need for repairs or an overhaul of components
contact Zmorph Technical Support. For local repairs, the housing may only be removed after the
machine has been disconnected from the power supply and the plug has been disconnected from
the socket,
▪
Make sure the room ventilation is working properly,
▪
The workpieces and tools must be mounted in a stable manner at the correct loca-tions. Avoid
collision between the workpiece and the machine otherwise, the machine may be damaged,
▪
Before starting work, check that there are no obstacles in the working area.
▪
Stop all operations while the workpiece is being changed,
▪
Do not touch electrical parts with wet hands.
Warning signs
CNC milling workflow
Caution: Danger from moving parts. To avoid injury or damage to parts of the
body, do not reach inside the unit or insert any foreign objects while the unit
is in operation, during operation or at rest.
Caution: High voltage - this symbol indicates the area where the user may be
electrocuted.
