Zirkon zahn M1 MILLING UNIT COMPACT LINE, Руководство по эксплуатации и обслуживанию

Страница: 48 / 52

48
CHAPTER
TECHNICAL DATA
ZIRKONZAHN – OPERATION AND MAINTENANCE MANUAL M1 MILLING UNIT COMPACT LINE – VERSION: 13/05/2021
- Spindle motor 200 W
- Block diameter Standard Ø 95 mm
- Compressed air connection min. 6 bar, max. 10 bar
- Average air consumption 100 l/min.
- Stand-by operation 90 W
- Operation during milling cycle 400 W
- Illumination of the device > 250 lux
- Protection class IP20 according to IEC/EN 60529
- Suction unit extraction capacity 3000 l/min, vacuum 20 kPa,
ſPGUWTHCEGſNVGT O
2
All electrical circuits connected to the device must comply with overvoltage category II (or better)
of IEC/EN 60664-1.
Option 2: All in One Touch PC
- Weight - pivot arm with PC 7.9 kg
- Maximum extendable length 550 mm
- Maximum height 500 mm
- Maximum height from bottom edge of milling unit 660 mm
- Protection class IP20 according to IEC/EN 60529
COMPRESSED AIR REQUIREMENTS
- Maximal dew point temperatur Dpt + 3 °C in case of atmospheric pressure: Class 4 (according
to ISO 8573-1:2010).
- 6QVCNQKNEQPVGPVŭOIO
3
: Class 2 (according to ISO 8573-1:2010).
- 5QNKFRCTVKENGUſNVTCVKQPGHſEKGPE[DGVVGTVJCPzO%NCUUCEEQ51
- 6JGEQORTGUUQTPGGFUVQDGGSWKRRGFYKVJCPQKNXCRQTCFUQTDGTJWOKFKV[ſNVGTCPFYCVGT
separator.
- Recommendation: To protect the compressor, it should have a tank volume of at least 50 l and
CPCXGTCIGƀQYTCVGQHNOKP