Zirkon zahn M1 MILLING UNIT COMPACT LINE, Руководство по эксплуатации и обслуживанию

Страница: 35 / 52

35
CHAPTER
CLEANING
ZIRKONZAHN – OPERATION AND MAINTENANCE MANUAL M1 MILLING UNIT COMPACT LINE – VERSION: 13/05/2021
CLEANING INSTRUCTIONS
Incorrect cleaning or failure to follow cleaning instructions might damage single
components or seriously endanger operators!
Before cleaning works of any kind, it must be ensured that the closing monitoring functions
correctly. If the lighting colour in the interior does not change when the front plate is opened,
there is a defect and the milling unit could start unintentionally even when the front plate is open.
The milling unit has an automatic cleaning mechanism. This completes the manual cleaning, but
does not replace it.
SAFETY MEASURES WHEN CLEANING THE MILLING UNIT
Wear protection mask, safety goggles and protective gloves when cleaning the milling unit (risk of
injury through shavings).
When designing the milling unit we assumed that all operators have a basic technical knowledge.
Therefore, all cleaning works can be easily carried out without professional help. In case of
uncertainties, contact Zirkonzahn's Support Team.
The use of compressed air is prohibited.
Only use cleaning agents recommended by Zirkonzahn.
CLEANING