802005UK - Residential (Boiling),chilled and sparkling installation instructions - Aug 2015 - v2.01
Page 15 of 40
Installation instructions
1.7 Height adjustment
(fixed position options)
50mm
Left hand control
Right hand control
*A
B
C
*A
B
C
1.8 Angular adjustment
(fixed position options)
Cut a
Ø
35mm hole in the work / sink top.
Note
Make sure the tap location will allow
the tap spout to drain into the sink.
Ø
35mm
Upper o-ring
Base Ring
Lower o-ring
(above work / sink top)
Lower rubber washer
Metal washer
Nut
(below work / sink top)
1.9 Mounting
(See hole positioning, page 11 )
Note
Use the Tube kit fitting instructions supplied with the tap kit to connect the tap head assembly to the
Command-Centre
TM
after the tap has been mounted securely.
