802005UK - Residential (Boiling),chilled and sparkling installation instructions - Aug 2015 - v2.01
Page 11 of 40
Section 1
HydroTap
®
G4 tap installation
Special tools required
In addition to normal tools, the following will be required.
For the HydroTap
®
G4 and mixer taps.
•
35mm diameter sheet metal hole punch for sinks (not supplied).
•
35mm diameter hole saw for worktops (not supplied).
•
Nut runner tube spanner (supplied) for fixing the tap assembly.
For the All-in-One tap.
•
50mm diameter sheet metal hole punch for sinks (not supplied).
•
50mm diameter hole saw for worktops (not supplied).
•
Nut runner tube spanner (supplied) for fixing tap assembly.
When installing a font, the following will be required
•
Sheet metal punch or hole saw to suit surface being cut.
Ø
140m for Arc / Cube and
Ø
108mm for Classic and Elite.
•
Hole positioning
Position the tap such that it dispenses into the sink bowl with ample clearance for a cup or tea
pot. Alternatively, the tap could be mounted away from the sink using a Zip Font
, available as
an accessory.(see Major components and accessories, page 8).
Tap positioning
Tap
Recommended dispensing
distance (mm)
Elite
116
HydroTap
®
Classic
116
HydroTap
®
Arc/Cube
171 (-174 extended)
All-in-One
211
Mixer - Arc
231
Mixer - Classic
270
Mixer - Cube
310
BC HydroTap
®
G4 Classic
116
Note
All-in-One and mixer taps have spouts that swivel.
All images are for illustrative purposes, to aid understanding of the system
configuration, and are not prescriptive of tap positioning.
•
Ensure that the taps are mounted to minimise the risk of scalding by
accidentally dispensing boiling water while using the mixer.
•
Ensure that the taps are mounted in a position that allows the water to
safely drain to waste throughout the complete positional range.
