Zip GP-SUPA004, Инструкция по эксплуатации

Страница: 308 / 381

31/08/2023
302
Zip DVR Manual V3
ZipDVR.com
Menu Timeouts
For security reasons the recorder will ask you to re-enter your password if you try to
control it after a period of inactivity. This is to prevent anybody from accessing the
recorder without authorisation.
You can set how long the period of inactivity must be before the recorder asks for the
password again from the
Menu Timeouts drop down list. By default this is set to 30
seconds but it can be set up to 10 minutes.
You can also disable the menu timeout all together by selecting Off , however we
don't recommend this.
Mode
Setting the Mode dictates what type of cameras the DVR can take on its analogue
channels and what resources are available.
XVR - Allows you to switch analogue channels to IP channels in the Video - Channel
Config sub-menu. By doing this you could have IP cameras on every channel if
needed. The only downside is the extra resources the DVR allocates to processing
the extra IP cameras means that there is a drop in the maximum frame rate available.
DVR - When setting the Mode to DVR you can not switch the analogue channels to
IP to gain extra IP cameras. You can still add the usual IP cameras in addition to the
analogue channels but the amount of supported IP cameras depends on the model of
DVR (
See Max IP Cameras ). This is a good option if you don't require any extra
IP cameras as the resources saved from processing them can be used on the
analogue channels instead. These extra resources can be used to increase the
maximum frame rate of you analogue cameras.
Audio Input Type
Setting the Input type determines which audio inputs are used.
Base-band Audio - Sets the audio type to the physical RCA Phono type connection
on the back of the recorder. This type of audio input requires a audio input
connection or microphone to be wired into the back of the recorder.
Coaxial Audio - In order to use compatible Zip audio of coax cameras, coaxial
audio needs to be set. The audio is captured at the camera and then set along side
the video and then decoded in the recorder.
Ensure Audio (Volume) is enabled for each channel in the record menu to record the
audio with footage to then playback. If not the audio will only be heard when looking
at the live view / preview on the DVR or via the Zip Vision Pro App.
Set this in
Record - Encode - Mainstream and Record - Encode - Substream
126
3
219 223