Zip GP-SUPA004, Инструкция по эксплуатации

Страница: 193 / 381

© 2023 System Q Ltd
187
Index
ZipDVR.com
Editing A Line Crossing
You can edit an existing line crossing as followed:
1. Select the Rule Number you want to edit the line crossing for from the Rule
Number drop down list.
2. Click the red square at the start of the line.
3. Click and drag the the start and end points to reposition them.
4. Click the red square at the start of the line to confirm and set the new positions.
Enabling And Disabling Individual Line Crossings
You can turn each of the camera's 4 Rules On or Off independently as and when they
are needed as described below:
1. Select the Rule Number you want to turn On/Off from the Rule Number drop down
list.
2. Using the Rule Switch check box you can then turn the rule On (ticked) or Off
(unticked).
Trigger On When The Line Is Crossed From 1 Direction Or Both
There are 3 options as to what direction of movement will trigger LCD. We call these
options
Rule Types .
For simplicity we label the area on one side of the line A and the area on the other
side of the line B . The direction of movement is also indicated by the light blue arrow
in the middle of the line. To choose a Rule Type first select the Rule Number you want
configure then select a Rule Type as described below from the
Rule Type drop
down list.
·
A->B - This option will only trigger when an object moves across the line from side
A to side B.
·
B->A - This option will only trigger when an object moves across the line from side
B to side A.
·
A<->B - This option will trigger when an object crosses the line in either direction.
Deleting Line Crossings
You have 2 options when removing line crossings from a camera; you can remove
individual line crossings or all line crossings as explained below:
Remove Line Crossings
To remove a line crossing click the Red Square at the start of the line to select it and
then click the Remove button to delete it.
Remove All Line Crossings
To remove all line crossings from the chosen camera simply click the Remove All
button.