Zip GP-SUPA004, Инструкция по эксплуатации

Страница: 182 / 381

31/08/2023
176
Zip DVR Manual V3
ZipDVR.com
Sensitivity
You can set the sensitivity level for the motion detection from 1 to 8 in the drop down
list.
1 is the lowest sensitivity level and will only trigger when there is a large amount of
movement inside the defined detection area.
8 is the highest sensitivity level and will trigger when slight movement is detected
inside the defined detection area.
Alarm Handling
Clicking the Alarm button will open the Alarm Handling screen where you can set
what actions the recorder will take when motion is detected for each channel. For
more information on setting up alarm handling see the
Alarm Menu - Motion
section.
Copying Motion Detection Settings
You can copy motion detection settings from one camera to another by clicking the
Copy button as explained in the Parameter Copy section.
Defaulting Motion Detection Settings
You can reset all motion detection settings for each camera by clicking the Default
button. This will restore factory settings.
Saving Changes
Once you are happy with your settings click the Apply button to save them.
Alternatively you can right click with the mouse to exit the Motion menu without saving
changes.
9.6.1 Video Menu - Motion - Setup
When you click a camera's Setup icon in the Motion Detection sub-menu the
Motion Setup screen will be displayed.
As well as allowing you to configure the camera's motion settings, the Motion Setup
screen allows you to draw grids to specify the areas of the camera's image you want
to observe for motion.
The recorder will then only look for motion within the gridded areas and ignore any
motion outside of these. This enables you to specify a doorway or an area around
parked vehicles for example.
241
350
175