Zip GP-SUPA004, Инструкция по эксплуатации

Страница: 300 / 381

31/08/2023
294
Zip DVR Manual V3
ZipDVR.com
13.2 Storage Menu - Disk - S.M.A.R.T
S.M.A.R.T (Self-Monitoring, Analysis, and Reporting Technology) is a tool designed
by IBM for checking the status of hard drives and predicting failures. Here we give a
brief overview of performing S.M.A.R.T tests on a Zip recorder. If you are unfamiliar
with S.M.A.R.T tests there's a wide range of information readily available online.
Running a Test
To run a S.M.A.R.T test follow these steps:
1. Select the hard drive you want to test from the HDD ID drop down list.
2. Choose the kind of test you want to perform from the Self-Check Type drop
down list.
Short Test - Checks the electrical and mechanical performance scanning parts of
the disk. Usually takes a couple of minutes.
Long Test - Thoroughly checks the electrical and mechanical performance
scanning the entire disk. This takes several hours.
Conveyance Test - A quick test to check for damage during transport, ideally
before the drive has been used for recording.
3. When you have selected the hard drive and test type click the Check button to
perform the test.
Reading Test Results
Self-check State
During the test the Self-check State will show the progress of the test as a percent.
Once the test has finished it will read "Self test successfully completed".