Zip GP-SUPA004, Инструкция по эксплуатации

Страница: 188 / 381

31/08/2023
182
Zip DVR Manual V3
ZipDVR.com
Selecting Your Camera
You can select the camera you want to configure perimeters for from Camera drop
down list.
Selecting A Perimeter
Your can create and configure up to 4 perimeters for each camera. These perimeter
configurations are called
Rules . You can select which Rule you want to create or edit
by selecting it from the Rule Number drop down list.
To make things easier you can quickly tell which perimeter belongs to which Rule as
it has a red Rule Number in the top left corner or the defined area.
Creating A Perimeter
To create a perimeter just follow these easy steps:
1. Select the Rule Number you want to create the perimeter for from the Rule
Number drop down list.
2. Click on the camera's image where you want to set the top left corner of the
perimeter.
3. Click where you want to set the bottom left corner.
4. Click where you want to set the bottom right corner.
5. Finally click where you want to set the top right corner of the perimeter.
You will notice as you are setting your corner points the recorder will draw a yellow
box between between the points.
Editing A Perimeter
You can edit an existing perimeter as followed:
1. Select the Rule Number you want to edit the perimeter for from the Rule Number
drop down list.
2. Click the red square in the top left corner of the parameter.
3. Click and drag the 4 corners to reposition them.
4. Click the red square in the top left corner to confirm and set the new positions.
Enabling And Disabling Individual Perimeters
You can turn each of the camera's 4 Rules On or Off independently as and when they
are needed as described below:
1. Select the Rule Number you want to turn On/Off from the Rule Number drop down
list.
2. Using the Rule Switch check box you can then turn the rule On (ticked) or Off
(unticked).