Zip GP-SUPA004, Инструкция по эксплуатации

Страница: 281 / 381

© 2023 System Q Ltd
275
Index
ZipDVR.com
Enabling DDNS
To configure DDNS follow these simple steps:
1. Tick the check box to enable DDNS .
2. Select ZIP-DDNS from the Server drop down list.
3. The Domain will be the recorder's serial number follwed by .ippostcode.com e.g.
JPV000000.ippostcode.com
4. In the Email field enter the email address you want the authentication password
sent to. (This may take a few minutes to come through)
5. Enter the authentication password you received by email into the Password field.
6. Click the Test button to check everything is working.
Remote Monitoring
With DDNS and Port Forwarding now set up you can connect to your recorder
remotely using the Zip Vision PC client software, mobile app or in the Internet
Explorer browser. Just enter the recorder's serial number follwed by .ippostcode.com
e.g. JPV000000.ippostcode.com.
To log on to the recorder you need to enter the same username and password as
you would on the recorder itself.
Monitoring Multiple Recorders Connected To The Same Router
If you intend to remotely monitor multiple recorders connected to the same router you
only need to setup DDNS for 1 recorder. This is because the ippostcode.com
address targets the router and not a specific recorder. You can then pinpoint the
recorder you want to connect to using the unique Client Port. For more information on
setting up port forwarding for multiple recorders see the
Port Configuration
section.
Defaulting Settings
To restore settings back to the factory default you can click the Default button.
Saving Changes
When you are happy with the current settings click the Apply button. If you exit the
window without saving any changes will be lost.
270