Zip GP-SUPA004, Инструкция по эксплуатации

Страница: 255 / 381

© 2023 System Q Ltd
249
Index
ZipDVR.com
Audio Warning
The recorder can be set to produce a loud beeping sound when there is a trigger on
the selected camera. From the
Buzzer drop down list you can choose the length of
time the recorder will sound the audio alarm for. You can also select Disable if you
don't want the recorder to sound a warning when triggered.
Trigger An Alarm Output
You can tell the recorder to trigger alarm outputs to activate a 3rd party device such
as a floodlight upon a trigger from the selected camera. Clicking the
Cog icon in the
Alarm Out column will open the Alarm Output window where you can dictate which
alarm outputs will be triggered. These can be the recorder's own local alarm outputs,
the alarm outputs of connected IP cameras or you can simply select All.
Latch Time
The Latch Time is the amount of time the alarm output remains active. You can set
the Latch Time up to a maximum of 60 seconds using the drop down list
Record Video On Smart Trigger
The recorder can be set to capture footage from a single or multiple channels when
there is a trigger. Typically if there is a trigger on camera 1 you would want to record
channel 1. This feature however allows you trigger recording on nearby cameras at
the same time or all entrances for example.
To set which channels are recorded click the Cog icon in the Record column to
display the Record Channel window.