Settings
8
Page 11
Note:
The following descriptions are based on the factory default settings.
All buttons, menus and sub-menus can be activated directly on the screen with
the touch pen or by a touch of the finger.
Ensure that all persons in the treatment room are wearing safety glasses.
To prevent unauthorised persons from using the laser,
Opton must be activated by entering a key code each time it is switched on.
Only once the code has been entered, can the laser beam output be set and
delivered.
Changes to the basic settings are only possible from the start-up screen.
.
Start-up screen
Note:
Selecting
settings
If no button is pressed within 4 seconds after turning on the device, the key
code screen automatically appears. During this initial 4 seconds, the user can
also press the "Start" button (2) or press "Settings" (1). Pressing the "Start"
button before the 4 seconds are up, immediately opens the window for
entering the key code.
If the home screen is activated, it automatically switches after 4 seconds to the
menu you have selected in the start-up settings (either basic program or
treatment recommendations).
Pressing the "Settings" button (1) opens the "Settings" screen.
Configuration menu
The configuration menu allows changes and individual adjustments to the
factory settings to be made.
8
1
2
