Device set-up
7.2 Assembly and putting into service
7
Page 10
Assembling the
mains cable
Connect the mains cable to the corresponding socket (9) on the device and
connect the cable to the mains.
Interlock plug
Connect the interlock plug (16) to the corresponding socket on the device (8).
Connect the
footswitch
Connect the footswitch (14) to the corresponding socket on the device (7) and
place it on the floor.
Switch on the device
Turn on the device at the main switch (12).
Key code
4 seconds after switching on, the "key" window will open automatically. Enter
the key code: 1234.
Note:
Each time the device is switched on via the main switch, the key code must be
entered.
Treatment screen
Confirm the key code with "OK"; this takes you directly to the treatment screen.
Setting the beam
intensity
Set the desired intensity with the intensity controller (3).
Activate the laser
Activate the laser by pressing "Start".
Applicator
Place the applicator (4) on the correct area of the body to be treated.
Start treatment
Treatment starts once the foot switch is activated.
End treatment
By de-activating the foot switch, the application is interrupted or terminated.
Place the applicator back into the calibration sensor after treatment.
