INSTALLATION AND OPERATING INSTRUCTIONS:
O-ring assembly gripper, pneumatic, GS series
9
Zimmer GmbH
•
Im Salmenkopf 5
•
77866 Rheinau, Germany
•
+49 7844 9138 0
•
+49 7844 9138 80
•
www.zimmer-group.com
EN / 2020-11-30
DDOC00228 / g
7.3 Installing the power supply
7.3.1 Installing the pneumatic system
NOTICE
Close off any unused pneumatic connections using suitable dummy plugs.
The authorized pneumatic connections that are available can be found in the accessories list, which is available
on our website.
You will also find the necessary ordering information there.
►
Use compressed air in accordance with DIN ISO 8573-1 [2:4:1].
The pneumatic fittings for connecting to the power supply can be mounted directly on the product.
Spread jaws
em
Ö
Connection A/A‘ –
Retracted in a depressurized
state
Ejector
en
Ö
Connection B/B‘ –
Retracted in a depressurized
state
Activation of the product with two 3/2 directional valves is
shown in the image.
The chronological sequence of the activation is illustrated in
chapter „Ablaufdiagramm“.
