INSTALLATION AND OPERATING INSTRUCTIONS:
O-ring assembly gripper, pneumatic, GS series
5
Zimmer GmbH
•
Im Salmenkopf 5
•
77866 Rheinau, Germany
•
+49 7844 9138 0
•
+49 7844 9138 80
•
www.zimmer-group.com
EN / 2020-11-30
DDOC00228 / g
4
Personnel qualification
Installation, commissioning and maintenance may only be performed by trained specialists. These persons must have read
and understood the installation and operating instructions in full.
5 Product description
5.1 Forces and torques
INFORMATION
For information on the forces and torques for the following component, please refer to our website
www.
zimmer-group.com:
• GS series
Please contact Zimmer Customer Service if you have any questions.
5.2 Type plate
A type plate is attached to the housing of the product.
The article number
am
and confirmation number
an
are shown on the type
plate.
XXX
XX-XXXXXX
am
an
6 Function
The product implements the movement sequence for picking up, inserting and wiping when installing O-rings in outer
annular grooves using two single-action pneumatic cylinders
in
io
.
By using the adjustable expanding stroke, the operator can prevent the O-ring from being overstretched and can ensure
consistent production quality.
Detecting the end position enables shorter cycle times and continuous control.
im
2-piece piston rod
in
Piston for the spread jaws
io
Piston for the wiper
