INSTALLATION AND OPERATING INSTRUCTIONS:
O-ring assembly gripper, pneumatic, GS series
Zimmer GmbH
•
Im Salmenkopf 5
•
77866 Rheinau, Germany
•
+49 7844 9138 0
•
+49 7844 9138 80
•
www.zimmer-group.com
8
EN / 2020-11-30
DDOC00228 / g
7.2 Installing the mechanical system
NOTICE
Non-compliance may result in material damage.
The product is mounted by means of the three tapped holes
fn
.
The product is positioned by straight pins in the two fits
fo
.
The following work steps must be observed during instal-
lation:
►
Insert straight pins into the fits
fo
provided on the product
for this.
►
Use straight pins to position the product on the
designated mounting piece.
►
Use the mounting screws to secure the product on the
mounting piece.
