INSTALLATION AND OPERATING INSTRUCTIONS:
O-ring assembly gripper, pneumatic, GS series
Zimmer GmbH
•
Im Salmenkopf 5
•
77866 Rheinau, Germany
•
+49 7844 9138 0
•
+49 7844 9138 80
•
www.zimmer-group.com
12
EN / 2020-11-30
DDOC00228 / g
7.4 Installing accessories
1
Removal jaws
►
Insert the centering pins
bm
into the drilled holes of the
wiper intended for them.
►
After that, position the removal jaws
1
on the centering
pins
bm
.
►
Attach the removal jaws
1
using the cylinder screw
bn
.
Ö
Only use screws with a strength class of 8.8.
Ö
Observe the permitted tightening torque.
1
2
Spread jaws
The gripper fingers
9
are prepared for installation of the
spread jaws
2
by inserting the centering sleeves
cm
.
►
Position the spread jaws
2
on the centering sleeves
cm
and align them with each other.
Ö
The spread jaws
2
must be exactly centered when
positioned.
Ö
To align the spread jaws
2
, use an adjusting ring with the
diameter of the later O-rings when not under tension.
►
Attach the spread jaws
2
using the cylinder screws.
Ö
Only use screws with a strength class of 8.8.
Ö
Observe the permitted tightening torque.
Notice:
The standard version of the UB65-4 variant is mounted
without centering sleeves!
2
