ZIEHL-ABEGG FXET4AMQ, Руководство по эксплуатации

Страница: 50 / 87

9.10.2 Digital inputs “ D1 ” / “ D2 ”
9.10.2.1 Menu overview
D1 Function
The digital inputs Digital In 1 (D1) and Digital In 2 (D2) can be allocated with various
functions.
Activation via
fl oating contacts (a low voltage of approx. 24 V DC is connected).
D1 Inverting
Inverting “ D1 ” and “ D2 ” possible
D1 Busmode
With networking the digital inputs can be replaced by control over bus.
With mode of operation
4.03 pre-setting of “ D1 ” and “ D2 ” is
|
ON
|
.
Attention!
Never apply line voltage to the digital input!
Function Description
OFF No function
1D Remote control, enable “ ON ” / “ OFF ” ( factory setting)
2D External error
3D “ Limit ” ON / OFF
4D Switch over “ E1 ” / “ E2 ”
For mode speed controller 1.01
5D Switch over “ Set Intern1 ” / “ Set Intern2 ”
6D Switch over “ Intern ” / “ Extern ”
For modes as controller higher 2.01
5D Switch over “ Setpoint1 ” / “ Setpoint2 ”
6D Switch over “ Intern ” / “ Extern ”
7D Switch over “ automatic control ” / “ Speed manual ”
8D Switch over control function (e.g. “ heating ” / “ cooling ” )
10D “ Reset ”
11D Setting Max. Speed “ ON ” / “ OFF ”
12D Motorheating ON / OFF (not for 1~ voltage controller)
13D no function!
14D “ Freeze function ” = maintain momentary modulation value
Operating Instructions Fcontrol – model series FXET4/6/10AMQ Programming
L-BAL-E079-GB 1706 Index 008 Part.-No.
50/87