3.4
Temperature management
The service life of devices with power electronics is decisively dependent on the ambient temper-
atures. The longer electronic components are exposed to high ambient temperatures, the faster the
deterioration and the more probable the failures.
The power electronics protects itself against excessive temperatures by active temperature manage-
ment (power reduction).
However, this cannot provide complete protection in all circumstances. Observe the rated data -
particularly the maximum permitted ambient temperature - on the rating plate.
3.5
Note on the ErP directive
ZIEHL-ABEGG SE wishes to point out that, based on the directive (EU) no. 327/2011 of the Commis-
sion of 30th of March 2011 for enforcing directive 2009/125/EC (hereinafter referred to as ErP
directive), the operational area of certain fans within the EU is bound by certain prerequisites.
The fan may only be used within the EU when it meets the requirements of the ErP directive.
If the said fan does not have a CE mark (cf. especially the rating plate), use of this product within the
EU is not admissible.
All ErP-relevant information comprises measurements which are determined using a standardised
measurement set-up. More details can be obtained from the manufacturer.
Further information about the ErP directive (Energy related Products-Directive) can be found on
www.ziehl-abegg.de search key: "ErP".
3.6
Transport, storage
Attention!
•
Observe the weight speci
fi
cations (see rating plate) and the permissible carrying loads of the means
of transport.
•
Wear safety clothing / shoes and cut-resistant safety gloves when handling.
•
Transport the fan(s) either in the original packaging or, in the case of larger fans, on the dedicated
transportation
fi
xtures.
–
Holes drilled in support arms, wall ring plates and motor block
•
Do not transport the fan by the connecting cable!
•
Avoid shocks and impacts to the device during the transport.
•
Avoid extreme heat or cold (for the temperature range for storage and transport please see the
technical data).
•
Watch out for possible damage to the packaging or fan.
•
Fix pallets during transport.
•
Do not stack pallets.
•
Only handle with suitable hoisting gear.
•
Never stand underneath the suspended fan because defective transport equipment could cause
death.
•
Store the fan / motor in the original packaging in a dry area protected from the weather and protect it
from dirt and weather until
fi
nal installation.
•
Avoid prolonged storage; we recommend a maximum of one year (consult the manufacturer before
starting if stored for longer).
•
Inspect the bearing for proper operation prior to installation.
–
Recommendation: Turn the impeller evenly by hand to avoid jamming and damaging the bearing.
3.7
Disposal / recycling
Disposal must be carried out professionally and in an environmentally friendly way in accordance with
the respective national legal stipulations.
"
Separate the materials by type and in an environmentally friendly way.
"
If necessary, commission a specialist company with the waste disposal.
Assembly instructions
ECblue BASIC-MODBUS, ECblue BASIC
Product overview
L-BAL-F079D-GB 2044 Index 002
Part.-No.
14/80
