ZIEHL-ABEGG Acontrol PSET6, Руководство по эксплуатации

Страница: 19 / 24

1
energized
Terminals 12 - 14
bridged no enable
Terminals “ D1 ” - “ D1 ” (Digital In 1)
not bridged.
Switch OFF by external contact
(
digital input).
2
de-energized
terminals 11 - 12
bridged Motor fault
Tripping of connected thermostat
or break between terminals
“ TB ” .
The unit cuts out and does not
switch on again.
Check motor and connection then
reset (
Motor protection).
Code
09.06.2011
v_flash_code_pset.VSD
2
1
ON
OFF
8.1 If controller doesn ´ t work correctly
Information
Setting of dip switches in principle only when device is not under voltage.
If the device is on mains supply modi
fi cations will partly not be identi fi ed and realized.
Attention!
It is generally forbidden to carry out work on electrical live parts. Protection class of the
device when open is IP 00! It is possible to touch hazardous voltages directly.
Operating Instructions Acontrol PSET6 / PSET10 Diagnostics / Faults
L-BAL-E141-GB 1925 Index 004 Part.-No.
19/24