4
MANUAL ORGANIZATION
This manual describes the operation and use of the ZT 8954 Low Profile Floppy Disk
Controller. The following outline summarizes the focus of each section in this manual.
Chapter 1, "
Introduction
," offers an overview of the ZT 8954. It includes a product
definition, a list of product features, a functional block diagram, and a brief description of
each block. This chapter is most useful to those who wish to compare the features of
the ZT 8954 against the needs of a specific application.
Chapter 2, "
Getting Started
," summarizes the information you need to get your
ZT 8954 operational. This includes system requirements and installation instructions.
Chapter 3, "
Theory of Operation
," presents an operational view of the ZT 8954's
hardware. Each of the board's functions is described in detail, and some common
concerns are addressed.
Chapter 4, "
FDC Description (82078)
," defines the 82078 Floppy Disk Controller
(FDC) and describes its functions and capabilities in detail.
Appendix A, "
Jumper Configurations
," describes all of the ZT 8954 jumpers in detail,
specifies factory default settings, and provides the information you need to tailor your
board to a specific application.
Appendix B, "
Specifications
," contains the electrical, mechanical, and environmental
specifications.
Appendix C, "
Customer Support
," offers technical support information, the Ziatech
warranty, and instructions for returning the ZT 8954 if service is necessary.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
