51
NOTE!
You must use the correct upgrade file for you camera. Otherwise, unexpected results may occur.
The upgrade file is a ZIP file and must include all the necessary files.
The boot program loads the operating system and then the system starts running. The upgrade boot
program function is disabled by default, and only the camera will be upgraded to the latest version. If
enabled, both the camera and the boot program are upgraded, and the operating system of the following
new versions can be booted properly and the camera can be upgraded conveniently.
Ensure that the power supply is normal during upgrade. The device will restart after the upgrade is
completed.
Restarting the System
1.
Click
Setup
>
System
>
Maintenance
.
2.
Under
Device Restart
, click
Restart
. The device will restart after you confirm the operation. You may
also enable auto-restart by selecting
Enable Auto Restart
and setting a time for auto-start. The device
will restart at the set time.
CAUTION!
Perform this operation with caution because restarting the system interrupts the ongoing service.
Importing and Exporting System Configuration File
Export the current configurations of the camera and save them to the PC or an external storage medium.
You can also quickly restore configurations by importing backup configurations stored on the PC or an
external storage medium back to the camera.
CAUTION!
After you perform the Default operation, all settings are restored to factory defaults, except the following:
login password of the system administrator, network settings, and system time.
Make sure you import the correct configuration file for your camera. Otherwise, unexpected results may
occur.
The camera will restart when the configuration file is imported successfully.
1.
Click
Setup
>
System
>
Maintenance
.
2.
To import configurations that you have backed up, click
Browse
next to the
Import
button and select
the configurations you want to import, and then click
Import
. The result will be displayed.
3.
To export configurations, click
Browse
next to the
Export
button, select the destination folder, and
then click
Export
.
4.
To restore default configurations, click
Default
and then confirm the operation. The device will restart
and restore the default configurations.