8
2.
In the
UNP Server IP
text box, enter an IP address for the UNP server. Select
Yes
to enable
authentication, and then set the username and password for UNP authentication.
3.
Click
Save
.
NOTE!
This function is not supported by some models, please see the actual model for details.
PPPoE
NOTE!
This function is not supported by some models, please see the actual model for details.
If the camera is connected to the network through Point to Point Over Ethernet (PPPoE), you need to select
PPPoE as the IP obtainment mode.
1.
Click
Setup
>
Network
>
TCP/IP
.
2.
Select
PPPoE
from the
IP Obtain Mode
drop-down list.
3.
Enter the username and password provided by your internet Service Provider (ISP).
4.
Click
Save
.
DHCP
The Dynamic Host Configuration Protocol (DHCP) is enabled by default when the camera is delivered. If a
DHCP server is deployed in the network, the camera can automatically obtain an IP address from the DHCP
server.
To manually configure DHCP, follow the steps below:
1.
Click
Setup
>
Network
>
TCP/IP
.