ZETRON 025-9581M, Руководство по установке и обслуживанию

Страница: 91 / 196

91
Station Transponder Unit Configuration
each Model 6203 or Model 6204 individually. The Station Interface box in the bottom of
this window is used for that purpose.
Figure 31: Station Interface Window
Hardware Type
This parameter selects the type of Station Transponder Unit being configured. There are
only two choices, the Model 6203 or the Model 6204. The Model 6203 uses its first
column of indicators/buttons (on the left) for the station and the remaining three columns
for units assigned to the station. The Model 6204 devotes all four columns to supporting
units. The Model 6204 is normally used as an expansion unit if the station has more than
three units assigned to it.
Use the down arrow on the right to open the drop-down list and select the appropriate
mnemonic.
Network Address
This parameter holds the IP address for the IP Interface board used in this Station
Transponder Unit to receive and respond to messages from the FSA Server. This field has
no default value and must be filled in when the system is configured in order for the FSA
Server to communicate with this Station Transponder Unit.
Port
This is the port used by the FSA Server when communicating with the Station
Transponder Unit. The default setting is
2101 . Do not change this setting without
consulting first with Zetron Technical Support.