Zetor PROXIMA PLUS 100 2012, Руководство оператора

Страница: 207 / 212

206
INDEX
Lever of manual refulation of fuel 42
Lever of shifting gears 43
Lever of shifting of road and reduced gears 44
Lever of shifting of speed 540 (or 540e) and 1,000 rpm
of the rear output shaft
45
Lever of switching on rear output shaf drive 46
Lifting forc eof three-point hitch 196
Lights switcher (a) 39
Limiting pull rods 107
List of lamps 133
Loading capacity of front tyres 193
Loading capacity of rear tyres 194
Location of serial numbers 5
Locking control levers 97
Longitudinal adjustment
24
Lower pull bars with extensible terminals 109
Lower pull bars with hooks CBM 109
Lubrication and filling points of the front driving axle 168
M
Main dimensions of the traktor (mm) 188
Maintenance and care for tyres 172
Maintenance instructions 153
Maintenance of dry air cleaner – indicator of clogging 158
Maintenance of the air-conditioning (a/c) systém 171
Maintenance of the alternator 128
Maintenance of the battery
127
Manipulation with the starter 52
Maximum permitted vertical static loading of hitches for
trailers and semi-trailers
79
Maximum transferred power 84
Maximum weight of fluid (kg) according to dimensions
of tyres
123
Mixed regulation of lifting the rear three-point hitch 94
Modular system of hitches for trailers and semi-trailers 75
Moving off 61
Mudguards of the front driving axle 117
Multi-level quick-adjustable hitch CBM 74
N
Non-freezing solution for filling of tyres 123
O
Oil filling, inspection and drain holes of front wheel
reducers
168
Oil for hydrostatic steering for tractors 142
Oil for zetor engines equipped with diesel particle filter 140
Oils for front drive axle 142
Oils for front output shaft 140
Oils for tractor transmission gearing 141
Oils for tractor transmission gearing
141
Oils for zetor engine, 140
Opening of doors from inside 19
Opening of doors from outside 19
Opening of front bonnet 155
Operation of heating of air-conditioning with work of
the tractor
29
Operations carried out after every 100 hours of work 136
Operations carried out after every 50 hours of work 136
Operations carried out after every 500 hours of work 137
Operations carried out daily before beginning of work
136
Operations carried out outside the interval of 500 hours
of work
137
Outer contour and track wheeling diamater
202
Outer hydraulic circuit 95
Outer hydraulic circuit controls 96