manualshive.com logo in svg

Zetor Proxima HS 100, Руководство оператора

Операторская инструкция "Zetor Proxima HS 100" - это необходимый ресурс для правильной эксплуатации вашей техники. Скачайте бесплатно этот руководство с нашего сайта manualshive.com и ознакомьтесь с основными функциями и рекомендациями по обслуживанию вашего трактора.

Поделиться
Скачать
background image

Connecting machines and tools to External hydraulic circuit

Connecting a double acting cylinder

A double acting cylinder must always be connected to quick couplers of one section.

Connecting machinery and tools assembled from more parts

When working with agriculture machinery which is assembled from more parts (combinators, scrubbers, or 

harrows) where the edge frame is hinged to the central frame because it is diagonally folded during transport 

by independent hydraulic cylinders which are controlled by outer hydraulic circuit of the tractor, it is 

recommended to connect the lifting arms of the cylinders to quick couplers (3) and (5) which are equipped 

with a one-way valve.

Connecting rotary hydraulic engine

If a hydraulic engine is connected to outer hydraulic drive, it is always necessary to connect its returnable 

arm to quick coupler (0). Filling (pressure) arm can be connected to quick couplers (1) or (2), where the 

hydraulic engine is protected by the 'kick-out' function from overload. This function stops the hydraulic engine 

if pressure in the filling arm exceeds 17 MPa.

Connecting reverse rotary hydraulic engine

Due to its function, reverse rotary hydraulic engine must be connected to quick couplers of one section. It is 

recommended to use quick couplers (1) and (2), where the hydraulic engine is protected by the 'kick-out' 

function from overload. This function stops the hydraulic engine if pressure in the filling arm exceeds 17 
MPa. If the hydraulic engine is connected to quick couplers of different sections, both arms must be 

equipped with safety valves which can be relied on to restrict high pressure peaks during run-out. Connect 

the safety valves drain to quick coupler (0).

Connecting external hydraulic distributor 

It is recommend to connect external hydraulic distributor to quick couplers (4) or (6). Control levers (b) and 

(c) are mechanically locked in these positions without hydraulic lock. 

Auxiliary machines using oil filling of external hydraulic circuit must be filled with the same 

kind of oil, which is recommended for gear system of the tractor! Quick-couplers sockets of an 

auxiliary machine need to be properly cleaned before connecting.

Front outlets of the external hydraulic circuit

On request, the tractor can be equipped with external 

hydraulic circuit outlets located in the front.

The quick couplings (1) and (2) are the pressure 

couplings, the quick coupling (0) is directly connected to 
the space of the axle final drive housing and is designed 

so that the return oil can flow back from the external 

hydraulic appliances.

The quick couplings sockets with the 12.5 mm inside 

diameter comply with the international ISO 

recommendations.

P13N002

HYDRAULIC SYSTEM 

115

Содержание Proxima HS 100





















































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Proxima HS 100

MASSEY FERGUSON 1500 BROCHURE 19.5-46 Brochure preview
1500 BROCHURE 19.5-46
Бренд: MASSEY FERGUSON Страницы: 12
Hagie STS 10 Combo Operator'S Manual preview
STS 10 Combo
Бренд: Hagie Страницы: 149
Broan Elite 15BLEXF Service Manual preview
Elite 15BLEXF
Бренд: Broan Страницы: 36
Bauer Tractor TURBOMIX MTXH Operating Instructions Manual preview
Tractor TURBOMIX MTXH
Бренд: Bauer Страницы: 42
Belarus 1523.5 Operator'S Manual preview
1523.5
Бренд: Belarus Страницы: 210
Jenn-Air TC607X2 Use & Care Manual preview
TC607X2
Бренд: Jenn-Air Страницы: 196
GE UCG1500N0BB Owner'S Manual preview
UCG1500N0BB
Бренд: GE Страницы: 12
Mahindra 585 DI OIB Service Bulletin preview
585 DI OIB
Бренд: Mahindra Страницы: 18
Broan 1050-J Service Manual preview
1050-J
Бренд: Broan Страницы: 12
MASSEY FERGUSON MF 300 Series Workshop Service Manual preview
MF 300 Series
Бренд: MASSEY FERGUSON Страницы: 41
GOLDONI JOKER 10 DS Operation And Maintenance preview
JOKER 10 DS
Бренд: GOLDONI Страницы: 60
GOLDONI 20 Operation And Maintenance preview
20
Бренд: GOLDONI Страницы: 122
GOLDONI 2070 Operation And Maintenance preview
2070
Бренд: GOLDONI Страницы: 168
GOLDONI 26RS Operation And Maintenance preview
26RS
Бренд: GOLDONI Страницы: 200

Бренды по названию

Популярные бренды

Загрузить еще бренды