Zetor Proxima HS 100, Руководство оператора

Страница: 39 / 212

Control panel on right cab pillar
PP15N017
Distribution of switches in a tractor of standard construction (A)
1 - switch of the cycler of the front wiper
2 - two-position switch of the front wiper and of the control of the front washer
3 - switch of the rear wiper
4 - switch of heating of the rear wiper
5 - switch of heating of the rear mirrors
6 - switch of the rear work lights on the cabin roof
7 - switch of the front work lights on the cabin roof
8 - switch of the rear PTO shaft
9 - switch of the front PTO shaft
If the tractor is equipped with electro-hydraulics (EHR), the switches (8) and (9) are transferred to the control
panel of the outer hydraulic circuit (B).
Wiper and washer of the front window
Front wiper speed switch
The switch of the front wiper and control of the front
washer are located on the right column of the cabin.
The double-speed engine of the front wiper is controlled
by the two-position switch of the front wiper.
The windshield washer is activated after pressing the
switch of the front double-speed wiper located on the right
column of the cabin. The maximum time of continuous
operation of the washer pump is 20 s.
When the washer is used, the windshield is automatically
wiped by the wiper. The number of wipings depends on
the operation time of the washer.
P15N022
The front wiper speed switch is turned on using the switch
located on the right column of the cabin.
Setting the wiper cycle period:
Turn on the speed switch, after the front window has been
wiped, turn off the speed switch, wait the required period
between wipes and turn on the speed switch.
The required gap between wipes is automatically set.
P15N023
ACQUAINTANCE WITH TRACTOR
38