zerona Z6, Руководство пользователя

Страница: 35 / 44

MAINTENANCE & WARRANTY INFORMATION | 30
MAINTENANCE AND CLEANING
MAINTENANCE
The Zerona Z6 OTC, if used per the instructions contained within this manual, will operate
efficiently for years. To ensure proper care, it is advisable for you to perform the following:
1. Regular visual inspections to ensure there is no external damage other than normal wear and
tear. Inspect all cords for signs of excessive wear (cuts in insulation or fraying). If during these
inspections, you identify an area of concern, please contact Erchonia Corporation to determine
if action is required.
2. If you notice a change in the performance of the device, please contact Erchonia Corporation to
determine if action is required.
3. The internal components should not require any maintenance, however if an issue arises, which
will show itself in the form of altered performance, the device must be sent to Erchonia
Corporation.
4. Since the device contains a touchscreen interface, periodic cleaning of the touchscreen will be
necessary. To clean the touchscreen, use a nearly dry cloth containing one of the mild cleaning
agents listed below. Ensure there is
NOT an excess of fluid.
5. The touchscreen back up battery must be replaced every five years. This must be done by
manufacturer.
6. If the fuses require replacement, unplug the power cord from plug source, locate power inlet /
fuse holder (figure 1 item 9), pull fuse holder out of enclosure, replace the two fuses
(T2AH
250V Fuses only) and reinsert.
CLEANING INSTRUCTIONS
ROUTINE USER MAINTENANCE
Clean the external surfaces of the device Weekly, or as needed
Clean the touch screen display Weekly, or as needed
Clean laser optics Weekly, or as needed
Clean Laser glasses Between each patient use
Connect power to the device and turn the key to the ON position,
powering the device ON. Keep device powered ON for a minimum
of 2 minutes.
This is to properly maintain the charge in backup batteries. Failure
to do so may result in certain aspects of the memory being lost.
When the device is first
received by the user and
bi-weekly