zerona Z6, Руководство пользователя

Страница: 17 / 44

ZERONA Z6 OTC OVERVIEW & ASSEMBLY | 12
ASSEMBLY DIRECTIONS
4. Laser Arm
7. Main Upright of base
10. Connector & Cable
11. Locking Knob

This may require two people.

Remove the locking knob [11] from the main
upright of base.

Once the locking knob is removed, hold the laser
head assembly and laser arm piece while you
attach the base [7] and the arm piece [4].
Fig. 2
 Gently feed the laser arm cable into the base device’s
upright shaft.

With the cables fed into the base device’s upright shaft,
insert the arm tube into the base. Make sure the tube is
aligned with the locking knob hole.