Zepro ZHDN 2500-150, Руководство по установке, Страница: 9 / 58

ZHDN 2500-150 Safety rules
9 www.zepro.com
2.2 Transport plug
When the lift is installed, the trans-
port plug in the hydraulic unit must
be removed and replaced with the
normal tank cap supplied with the
hydraulic unit.
NOTE.
54853
2.3 Moving parts - free movement
When the final inspection* takes place,
the space occupied by the moving
cylinders must be cleared and made
safe. There is a risk of collision be-
tween the cylinder and the following
items: subframe, truck chassis, beam
for rear light (number plate) and the
chassis bracket of the lift (with a short
overhang).
*The final inspection must be carried
out with the platform flat and tilted down
10°. The clearance from the closest part
of the cylinder must be at least 40 mm.
m
WARNING!
The platform must not be tilted down
more than 10º from the horizontal.
m
WARNING!
min 40mm
10º
10º
Image 4. Replace the transport plug
with the normal tank cap
Image 5. Clearance to the closest part of
the cylinder must be at least 40 mm
Image 6. Platform must not be tilted down
more than 10º from the horizontal