ZHDN 2500-150
52
Lubrication and fluid level check
www.zepro.com
12.2
Dynamic load test.
12.2.1
Test with max load
Place a test load on the platform according to the table for the respective tail lift model and lifting
capacity.
Check that the lift operates correctly in the normal range of movement allowed i.e up, down, tilt-
ing at the vehicle floor level.
12.2.2
Test with overload
Place a test load on the platform according to the table for the respective tail lift model and lifting
capacity.
The test load should be 1.25 x the lift model's max load. Check that the lift gate cannot lift the
load when the up function is switched on (it can however by possible to tilt up the load).
Dynamic load (Test load 1.0 x tail lift loading capacity). For tail lifts with load centre of 1000
mm
Capacity
Load 1500 kg
Load 2000 kg
Distance out in platform (L)
1500 kg
1000 mm
-
2000 kg
1300 mm
1000 mm
12.3
Test of safety functions
The tail lift functions must be tested.
Check:
•
That the red light in the vehicle cabin turns off when the platform is completely closed
against the body and that it turns on when the platform is opened (where applicable).
•
That the tail lift will not operate if the cabin switch is in the off position.
•
That the tail lift cannot be operated when the main switch fuse is removed (where applica-
ble).
• That the overflow valve is activated when the lift is run up to the vehicle floor level or end
stops.
•
That the tail lift cannot be lowered or tilted down if the electrical connector from the electric
hose breakage valves is removed from the lift and tilt cylinders respectively.
•
That the max load marking on the platform has been attached and is correctly positioned
according to the loading diagram for the tail lift model concerned.
• That the warning flags are installed and fulfil their function correctly.
•
That all safety and operating decals are installed in their respective position.
•
That the mechanical lock of the platform functions correctly (where applicable).
•
That the operator's handbook has been left in the driver's cabin.
• That the declaration of CE conformity has been filled in (where applicable).
Содержание ZHDN 2500-150
Страница 2: ......
Страница 57: ...ZHDN 2500 150 Specifications 57 www zepro com Image 64 Loading diagram 14 4 Loading diagram ...
