Zentan Technology Fusion 20, Руководство пользователя

Страница: 7 / 23

5
4 After a few seconds the heart
symbol will start flashing and
your heart rate will appear.
Setting up your Fusion 20
and 30
Impulse
has one setting loop,
which is entered from the Time
of Day (ToD) screen.
Once you enter this, each press
and release of
SELECT takes
you to the next setting in the
loop and returns to the Time of
day screen.
The setting loop for
Fusion 20
is seconds, hours, minutes, day
of week, month, date, alarm
mode, daily alarm hour, daily
alarm minute, heart zone high
limit, heart zone low limit,
countdown timer single or
auto-repeat, countdown timer
hours, minutes, seconds, then
back to time of day.
Fusion 30 has the following
additions in the setting loop
(after countdown timer
seconds)–heart rate recovery
high, heart rate recovery low,
ambient heart rate, weight,
age.
Entering the setting loop
In the ToD screen, press and
hold
SELECT until the seconds
flash and the SELECT icon
appears on the display.
Note: A press of the
MODE
button at any stage in the
setting loop takes you back to
the main Screen for that
setting.
Setting Time and the
calendar
Press and release ST./FWD or
SCAN to reset seconds to zero.
Note: if seconds are over 30
when you reset, minutes will
advance by 1.
Press SELECT to move to
hours.
Press and release
ST./FWD to
increase, or SCAN to decrease
the hours.
Note: A press and hold of
ST./FWD
will ‘fast forward’ or
SCAN
will ‘fast reverse’ the
number.
Press SELECT to move to
minutes.
Press and release
ST./FWD to
increase, or SCAN to decrease
the minutes.