Zentan Technology Fusion 20, Руководство пользователя

Страница: 12 / 23

10
Press and hold SELECT . An
alarm icon will appear.
To turn off the alarm press and
hold
SELECT until the icon
disappears.
Heart rate recovery alarm
(Fusion 30 only)
Fusion 30 automatically
records the amount of time it
takes your heart to drop from a
pre-set upper limit to a pre-set
lower limit. Timing begins
automatically when your heart
rate passes through the upper
limit, and continues until your
heart rate drops below the
lower limit. When timing stops,
the Heart Rate Recovery alarm
gives four continuous beeps
whenever a heart rate recovery
is completed. The alarm cannot
be switched off.
Note: To view the HRR time,
move to the TiZ main screen
and press
ST./FWD
.
Using the stopwatch
Stopwatch can be used with or
without heart rate activated,
and is operated in the same
way for either modes.
To start stopwatch, press and
release ST./FWD .
To stop stopwatch, press and
release ST./FWD .
To reset stopwatch, press and
hold ST./FWD when the
stopwatch is not running.
Note: Maximum stopwatch
time is 9 hours, 59 minutes,
59.9 seconds.
Using countdown timer
Countdown timer can be used
with or without heart rate
activated.
When the time has counted
down to zero, an audible alarm
sounds for 10 seconds.
To
start countdown timer,
press and release ST./FWD .
To stop countdown timer,
press and release ST./FWD .
To reset countdown timer,
press and hold ST./FWD when
the countdown timer is not
running.
Note: Maximum countdown
time is 9 hours, 59 minutes,
59.9 seconds.