Zentan Technology Fusion 20, Руководство пользователя

Страница: 5 / 23

3
Caution
Before you begin your exercise
programme, get an assessment
of your overall fitness level.
You are advised to get
clearance from your doctor that
it is safe for you to exercise.
Important Tips
1- You must make a long press
of
MODE in any main screen
before you can get a heart rate
reading.
2- If you get into a set up
screen by mistake, a press and
release of
MODE takes you
back to a main screen.
Successive presses of
MODE
will scroll you through all main
screens.
3- For proper heart rate
readings, it is essential that
there is sufficient moisture
(water) between the electrodes
on the transmitter and your
skin. Insufficient moisture can
cause no reading, frozen
readings or erratic readings.
4- When using a wireless heart
rate monitor near computers,
electric motors, high voltage
power lines, televisions, other
heart rate monitors and mobile
phones, erratic readings may
occur.
5- You can wear the
Fusion
monitor when swimming, but
do not push any of the buttons
while the receiver (watch) is
underwater.
Putting on the transmitter
·
Attach one end of the
adjustable elastic strap to the
transmitter.
·
Moisten the rubber electrodes
of the belt with either water
or saliva as shown.
·
Position the transmitter on
the chest just below the
breastbone, with the
Cardiosport logo the right
way up.
·
Pass the elastic strap around
your chest and attach to the
other end of the transmitter.
·
Adjust the strap to give a
close but comfortable fit.