Zentan Technology Fusion 20, Руководство пользователя

Страница: 19 / 23

17
FCC Statement
This device complies with Part 15 of
the FCC rules. Operation is subject
to the following two conditions:
1. This device may not cause
harmful interference.
2. This device must accept
m\any interference received,
including interference that
may cause undesired
operation.
The radiated output power is far
below the FCC Radio frequency
exposure limits. Nevertheless, this
device should be used in such a
manner that the potential for human
contact during normal operation is
minimized.
This Equipment has been
tested and found to comply
with the limits for a class B
digital device, pursuant to Part
15 of the FCC rules. These
limits are designed to provide
reasonable protection against
harmful interference in a
residential installation. This
equipment generates, uses and
can radiate radio frequency
energy and, if not installed and
used in accordance with the
instructions, may cause
harmful interference to radio
communications. However,
there is no guarantee that
interference will not occur in a
particular installation. If this
equipment does cause harmful
interference to radio or
television reception, which can
be determined by turning the
equipment off and on, the user
is encouraged to try to correct
the interference by one or
more of the following measures:
- Reorient or relocate the
receiving antenna.
- Increase the separation
between the equipment and
receiver.
- Connect the equipment into
an outlet on a circuit different
from that to
which the receiver is
connected.
-
Consult the dealer or an
experienced radio/TV
technician for help.