Zennio MINiBOX 45v2, Руководство пользователя

Страница: 14 / 37

MINiBOX 45 v2/MINiBOX 25 v2
http://www.zennio.com Technical Support: http://support.zennio.com
14
2.4 LOGIC FUNCTIONS
This module makes it possible to perform numeric and binary operations to incoming
values received from the KNX bus, and to send the results through other communication
objects specifically enabled for this purpose.
MINiBOX 45 / 25 v2 can implement up to 10 different and independent functions ,
each of them entirely customisable and consisting in up to 4 consecutive operations
each .
The execution of each function can depend on a configurable condition , which will be
evaluated every time the function is triggered through specific, parameterizable
communication objects. The result after executing the operations of the function can also
be evaluated according to certain conditions and afterwards sent (or not) to the KNX
bus, which can be done every time the function is executed, periodically or only when
the result differs from the last one.
Please refer to the specific
“
Logic Functions
” user manual (available in the MINiBOX
45 / 25 v2 product section at the Zennio homepage, www.zennio.com ) for detailed
information about the functionality and the configuration of the related parameters.