MINiBOX 45 v2/MINiBOX 25 v2
Technical Support:
19
2.7
SCENE TEMPORISATION
The scene temporisation allows imposing
delays over the scenes of the outputs
.
These delays are defined in parameters, and can be applied to the execution of one or
more scenes that may have been configured.
Please bear in mind that, as multiple delayed scenes can be configured for each
individual output or shutter channel, in case of receiving an order to execute one of them
when a previous temporisation is still pending for that output or that channel, such
temporisation will be interrupted and only the delay and the action of the new scene will
be executed.
ETS PARAMETERISATION
Prior to setting the
scene temporisation
, it is necessary to have one or more scenes
configured in some of the outputs. When entering the Configuration window under Scene
Temporization, all configured scenes will be listed, together with a few checkboxes to
select which of them need to be temporised, as shown in Figure 6.
Figure 6.
Scene temporisation
Enabling a certain
Scene Number n
[
disabled
/enabled
] brings a new tab with such name
to the menu on the left, from which it is possible to configure the temporisation of that
scene for each of the outputs where it has been configured.
