Zennio MINiBOX 45v2, Руководство пользователя

Страница: 17 / 37

MINiBOX 45 v2/MINiBOX 25 v2
http://www.zennio.com Technical Support: http://support.zennio.com
17
Figure 5. Master Light
Number of State Objects [ 1
…12
]: defines the number of 1-bit status objects
required. These objects are called “
[ML] Status Object n
”.
In addition, the general status object (“
[ML] General status
”) will always be
available in the project topology. It will be sent to the bus with a value of “1”
whenever there is at least one of the above state objects with such value.
Otherwise (i.e., if none of them has a value of “1”), it will be sent with a value
of “0”.
Trigger Value [ 0 / 1 / 0/1 ]: sets the value that will trigger, when received
through “
[ML] Trigger
”, the master action (the general switch-off or the
courtesy switch-on).
General Switch-Off .
➢
Delay [ 0
…255
] [ x 1 s ]: defines a certain delay (once the trigger has been
received) before the execution of the general switch-off. The allowed range
is 0 to 255 seconds.
➢
Binary Value [ disabled/ enabled ]
: if checked, object “
[ML] General Switch-
off: Binary Object
” will be enabled, which will send one “0” whenever the
general switch-off takes off.