Zennio KLIC-PA, Руководство пользователя

Страница: 24 / 34

KLIC-PA
http://www.zennio.com Technical Support: http://support.zennio.com
24
Note : even if this option is not enabled, the status objects may be sent to the
KNX bus if the initial configuration differs from the current status of the A/C
machine .
2.4.3 SCENES
The Scenes function allows defining a set of statuses (in terms of On/Off, mode, fan
speed, etc.) that KLIC-PA will send to the A/C unit whenever it receives the
corresponding scene values from the KNX bus.
ETS PARAMETRISATION
After enabling this function (see section 2.4.1), a new tab named Scenes will be
incorporated to the tab tree. It allows setting up different scenes (up to 5), consisting
each of them in a set of orders to be sent to the A/C unit upon the reception, through the
KNX bus and by means of the
“
[AC] Scenes
” object, of the corresponding scene value
(decreased by 1, according to the KNX standard).
Figure 18. A/C Gateway. Scenes.
For every enabled scene, the particular parameters that should be configured are:
•
Scene Number [ 1 ...64 ]: sets the scene number that, upon reception through
the
“
[AC] Scenes
” object, will trigger the corresponding orders, as defined
next.