Zennio KLIC-PA, Руководство пользователя

Страница: 15 / 34

KLIC-PA
http://www.zennio.com Technical Support: http://support.zennio.com
15
9 Fan only
14 Dry
Table 2. A/C unit operating modes + Auto
Note: Setting auto mode when it is not allowed will cause the controlled unit
to shut down.
FLAPS
Figure 8. A/C Gateway. Configuration. Flaps
The Flaps function allows sending the A/C unit orders to switch the position of the flaps
(or vanes) that direct the air flow outwards. To that end, KLIC-PA provides a percentage
control.
•
Flaps [ disabled /enabled ]: allows the percentage control type which will be
applied in flaps. Flaps position can be controlled through the 1-Byte object
“
[AC] Flaps: Percentage Control
” and its
related
status object, “
[AC] Flaps:
Percentage Control (Status)
”. The total number of positions is five:
Control Values Status Value Position Sent to the Unit
1-20% 20% Position 1
21-40% 40% Position 2
41-60% 60% Position 3
61-80% 80% Position 4
81-100% 100% Position 5
Table 3. Flap positions.