KLIC-PA
Technical Support:
23
Figure 17. A/C Gateway. Initial Configuration.
•
On/Off
[
Last (Before Restart)
/ On / Off
].
•
Mode
[
Last (Before Restart)
/ Heating / Cooling / Fan / Dry / Automatic
].
Note:
if fan mode is selected, setpoint temperature and automatic fan speed
cannot be selected
.
•
Flaps
[
Last (Before Restart)
/ Swing / 1 / 2 / 3 / 4 / 5
]. This option only will be
visible in case of having enabled Flaps; on the contrary this section will appear
as “Not Available”
•
Speed
[
Last (Before Restart)
/ Automatic / 1 / 2 / 3 / 4 / 5
].
•
Setpoint
[
disabled
/enabled
]:
➢
Value:
•
“
Last (Before Restart)
”. Only available if “Setpoint” parameter remains
disabled.
•
“
10…
25
…32
”.
Note
:
this initial setpoint value may be modified by the setpoint limits during
runtime.
•
Initial Sending of Status
[
disabled
/enabled
]:
If enabled, the status objects will
be sent to the KNX bus after applying the parametrized
delay
[
0…
1
…3600
].
