KLIC-PA
Technical Support:
16
In addition, KLIC-PA allows activating the
swing function
(so the flaps oscillate
continuously for better distribution of the airflow). The
value “0%” of the "
[AC]
Flaps:
Percentage Control
"
and "
[AC]
Flaps: Percentage Control (Status)
" objects, will be
reserved for triggering such function and reporting whether it is currently active,
respectively.
➢
Individual Object for Swing
[
disabled
/enabled
]: 1-Bit objects
“[AA] Flaps:
Swing”
and
“[AA] Flaps: Swing (Status)”
activate swing function and
informs the currently state, respectively.
•
Swing Object Polarity
[0
= Swing On; 1 = Swing Off /
0 = Swing Off; 1
= Swing On
]: sets the polarity of the above objects.
Besides, KLIC-PA allows activating the
Standby
function in case of being available in
the unit:
➢
Standby Object
[
disabled
/enabled
]: sets whether the A/C unit incorporates
the
standby function
. If enabled, the objects "
[AC]
Flaps: Standby
"
and
"
[AC]
Flaps: Standby (Status)
" will be used for triggering such function and
reporting whether it is currently active, respectively. When this function is
deactivated, flaps will go to position 5 in heating mode, and to position 1 in
the rest of the modes.
•
Standby Object Polarity
[
0 = Standby On; 1 = Standby Off /
0 = Standby
Off; 1 = Standby On
]: sets the polarity of the above objects.
FAN
Figure 9. A/C Gateway. Configuration. Fan.
