Zennio KLIC-PA, Руководство пользователя

Страница: 11 / 34

KLIC-PA
http://www.zennio.com Technical Support: http://support.zennio.com
11
2.4 AC GATEWAY
2.4.1 CONFIGURATION
KLIC-PA allows controlling and monitoring an air-conditioning unit in the same way it
would be through the wired remote control it is provided with.
Through the KNX bus, KLIC-PA can be sent orders to control the following basic
functions of the air conditioning unit:
•
On/Off switch of the air-conditioning unit.
•
Operation mode : automatic, heating, cooling, fan and dry.
•
Temperature setpoint , which can be modified within a specific range of
values, depending on the capabilities of the specific A/C unit being controlled.
•
Fan speed : three fan speeds.
•
Control of flaps (or vanes) positioning : direct positioning, swing movement
and standby function, depending on the A/C unit.
Moreover, KLIC-PA allows configuring several advanced functions:
•
Setpoint limits : to restrict the range for the temperature setpoint.
•
External reference temperature : which allows enabling an object to use an
external reference temperature, provided by a temperature probe.
•
Filter : which allows to know the filter status of the A/C Unit.
•
Operating time : provides the A/C unit operating time.
•
Automatic off , which allows an automatic and temporary switch-off of the unit
(after a pre-established delay, if desired) when the communication object
associated to this function is triggered due to a certain event.
•
Initial configuration : which allows establishing the desired initial parameters
for the state of the A/C unit after programming or restarting the device.