KLIC-DI VRV
http://www.zennio.com
Technical Support:
http://support.zennio.com
14
3.2.1
SCENES
After enabling this function, the left menu will show a new tab named Scenes, from
where it will be possible to set up different scenes (up to 4), consisting each of them in
a set of orders to be sent to the A/C unit upon the reception, through the KNX bus and
by means of the
object “
Scenes: Receive
”, of the corresponding scene value
(decreased by 1, according to the KNX standard).
Figure 7.
Scene configuration
For every enabled scene, the particular parameters that may be configured are the
following:
Scene number.
Sets the scene number (1-64) on whose reception (through
the Scenes object, decreased by one) the corresponding configured orders
will be sent to the A/C machine. The available orders are:
➢
On/Off.
Brings the possibility of setting the A/C machine state: No change,
on or off.
➢
Temperature.
No change, or a New temperature setpoint (from 16ºC to
32ºC).
➢
Mode.
No change, Auto, Heat, Dry, Fan or Cool.
➢
Fan.
No change, minimum or maximum.
➢
Swing.
No change, swing (in motion) or in any of the five fixed positions
available.
An example of scene configuration is shown in Figure 8.
