KLIC-DI VRV
http://www.zennio.com
Technical Support:
http://support.zennio.com
26
Important
:
the number of levels must match with the number of levels of the
A/C machine.
Step control
: enabling this feature ("Yes") brings up the "
Fan [1bit]
" one-bit
object, which allows increasing (by sending the value "1") or decreasing
(value "0") the fan speed by one level (for example, under a three-level
parameterisation and under the minimum fan speed level, the value "1" sent
via the "Fan [1bit] sending" object will make the fan speed level change to
“medium”).
The step control is
non-cyclical
. This means that, being at the minimum level (33% or
50%), any decrease order will be ignored by the unit, which will maintain the same fan
level unless an order to increase it is received. Analogously, when the fan speed is at
its maximum (100%), it will remain unchanged until a decrease order is received.
