Module Retaining Bracket
The module retaining bracket is used to secure the CPU and
memory modules in the system board. The bracket must be
removed before removing a CPU or a memory module from the
system board. After installing the CPU or memory module, the
bracket must be installed.
Removing the Module Retaining Bracket
1.
Power off the server and remove the system covers as
described earlier in this chapterin the Setting Up Guide.
Notice: Observe static precautions. Use an antistatic wrist strap.
2.
To remove the CPU module retaining bracket: While
supporting the CPU module (B), squeeze the notched end of
the module retaining bracket (2) that protrudes through the
slot in the back of the chassis (3) and slide it forward
through the slot near the fan and card guide support panel
(1) until it stops.
To remove the memory module retaining bracket: While
supporting the memory module (C), squeeze the notched end
of the module retaining bracket (2) that protrudes through
the slot near the fan and card guide support panel (1) and
slide it through the slot in the back of the chassis (3) until it
stops.
04/APRIL/93 – 595-5484-UU
67
4-13
Upgrades and Options
