Selecting Drive Number and Parity
The factory default drive number setting is Drive 2. If the Drive has
to be set up as a different unit number, the jumpers have to be
inserted according to the following table (Strap connected = IN).
PAR
SEL2
SEL1
SEL0
MEANING
IN
OUT
OUT
OUT
Select Drive 0
IN
OUT
OUT
IN
Select Drive 1
IN
OUT
IN
OUT
Select Drive 2
IN
OUT
IN
IN
Select Drive 3
IN
IN
OUT
OUT
Select Drive 4
IN
IN
OUT
IN
Select Drive 5
IN
IN
IN
OUT
Select Drive 6
IN
IN
IN
IN
Select Drive 7
Terminators
Remove the SCSI terminator resistors, located behind the SCSI
interface cable. Termination is provided by the inline terminator
plug on the end of the SCSI signal cable P7.
04/APRIL/93 – 595-5484-UU
188
188
D-20
Devices
