Zelmer ZIR3000, Руководство пользователя

Страница: 14 / 72

14
PRODUCT DISPOSAL
EN
This product complies with European Directive 2012/19/EU on electrical and electronic
devices, known as WEEE (Waste Electrical and Electronic Equipment), provides the legal
framework applicable in the European Union for the disposal and reuse of waste electronic
and electrical devices. Do not dispose of this product in the bin, instead going to the electri- cal
and electronic waste collection centre closest to your home.
We hope that you will be satisfied with this product.
TROUBLESHOOTING
Connection problem
Not enough water in tank
Not enough water in tank
Steam jet function was used
very frequently within a short
period.
Check main power supply cable,
plug and outlet.
Temperature control is in MIN
position
Select adequate temperature
Fill water tank
Fill water tank (see “getting
started”, no 2).
Steam control is selected in
non- steam position.
Set steam control between
positions of minimum steam
and maximum steam (see“iron
chart”).
Put iron on horizontal position
and wait before using steam jet
function.
Selected temperature is lower
than that specified to use with
steam.
Select a higher temperature
Iron is not hot enough Adjust to higher temperature to
steam ironing. Put iron in
vertical position and wait
temperature indicator light
turns off.
PROBLEM POSSIBLE CAUSE SOLUTION
STEAM JET AND VERTICAL
STEAM JET FUNCTION
DOES NOT WORK
Steam jet function was used
very frequently within a short
period.
Put iron on horizontal position
and wait before using steam jet
function.
STEAM JET AND VERTICAL
STEAM JET FUNCTION
DOES NOT WORK
SOLEPLATE IS NOT
HEATING EVEN THOUGH
IRON IS TURNED ON.
IRON DOES NOT PRODUCE
STEAM
SPRAY FUNCTION DOES
NOT WORK
C
M
Y
CM
MY
CY
CMY
K
AF-MANUAL_Plancha-ZELMER ZIR3000 stiro.pdf 14 12/4/21 11:38