User’s Manual
9
ZEKA LP
3. SAFETY REQUIREMENTS
•
Do not install the printer near sources of water and do not allow contacts
with water or other liquids.
•
Do not install the printer on unstable surfaces to avoid its overturning.
•
Do not install the printer near sources of heat.
•
Do not install the printer on vibrating or vibration-conducting surfaces if
possible.
•
Plug the printer into electric outlets with 220V voltage and 50Hz frequency.
Turn the PRINTER off from its power switch before plugging or unplugging
it.
•
Use only standard electric plugs. If the plug does not meet the requirements
contact a qualified electrician to fix it.
•
Should an extension cord be used it must also meet the same standard
requirements. Do not plug electric motors, heaters or other devices with
high consumption of electricity into the same extension cord.
•
Do not use defective power supply cables; do not press or bend the power
supply cable of the printer.
•
Do not insert metal objects into the printer – electrical shock hazard.
•
Unplug the printer before cleaning it and do not use aggressive detergents.
•
Do not try to repair the printer on your own. If there are any problems
contact the authorized service organization.
•
Unplug the printer and contact the authorized service organization in any of
the following cases:
o
The power supply cable of the printer is damaged;
o
The printer is splashed with liquids;
o
There is a mechanical damage of the printer;
o
printer does not operate normally.
Содержание LP
Страница 30: ...User s Manual 30 ZEKA LP 5 dots...
Страница 38: ...User s Manual 38 ZEKA LP format EI...